• Premium quality, 8" Diameter cast brass hinged floor plate is machined for a high quality fit and finish. (Don't skimp on sleeve quality or you'll find yourself replacing these in a few years)
• 10" deep
  
• Allows floating wooden floors to expand and contract with changes in humidity
• Requires subfloor excavation and routing of wood to retrofit into existing facilities
• 3-1/2" Sleeves will accept 3-1/2" poles and 3" poles. 3" Sleeves will accept 3" poles only
• Requires two per system
• Note: Floors with basements or hollow cavities below require additional re-inforcement. Please call us for site specific install help.
  
• Detailed installation instructions provided at no cost.

• Lockable plates prevent dead spots in gym floor during basketball games
• Chrome-plated cover plate includes slotted locking mechanism
  
• Opens with simple turn of the flathead screwdriver or coin
  
• Cover plate consists of 7" (18cm) O.D. chrome outer ring and hinged chrome cap
  
• Heavy-duty steel sleeve receives 3" to 3-1/2" (7.6 to 8.9cm) upright and is 9-1/4" (23cm) deep
  
• 1" (2.5cm) clearance required between top of floor and sleeve

• Large 6" I.D. with 8" O.D.
• Cover plate is lockable with hex key (included)
• Plate swivels open when in use
• Chrome plated steel finish
• 1" clearance suggested between top of floor and sleeve below

• 3" or 3-1/2" Sleeves are secured with a special swivel hinge to prevent removal or theft.
• Available in Chrome Plated Steel or Solid Brass
• The cover plate lies flat on the floor while the equipment is in use.
• A special cover removal key is provided to prevent use by unauthorized individuals.
• The perimeter mounting collar and cover may be flush mounted in a wood or synthetic floor.
• Sleeves are provided for specific use in new
  construction, remodeling or existing floor
  installations.

• Powder coated seamless aluminum construction with welded base ring to lock sleeve firmly into concrete
• For use on all non-floating floor systems, including concrete, tile, carpet or synthetic materials
• Includes aluminum powder coated cap
• Requires excavation of existing floors
• Socket is approx. 12" deep
• Requires two per system
• 5" O.D. Sleeve cap ring completely covers hole drilled through concrete so no floor repair is needed after installing sleeves.
• Key slot on cap allows for easy removal
• Note: Floors with basements or hollow cavities below require additional re-inforcement. Please call us for site specific install help.
  
• Detailed installation instructions provided at no cost.

• Seamless Anodized Aluminum Construction
• Use on all non-floating floor
  systems, including concrete, tile or synthetic
• Powder Coated Aluminum Cap
• Requires excavation of existing floors
• Socket is approx. 18" deep
• Requires two per system
• Note: Floors with basements or hollow cavities below require additional re-inforcement. Please call us for site specific install help.
  
• Detailed installation instructions provided at no cost.

• Seamless Anodized Aluminum Construction
• Suggested for use outdoors in sand, grass, or concrete
• Powder Coated Aluminum Cap
• Socket is approx. 18" deep
• Requires two per system
• Note: Floors with basements or hollow cavities below require additional re-inforcement. Please call us for site specific install help.
  
• Detailed installation instructions provided at no cost.

(Click to Enlarge)

Call for pricing and to place an order.

CFBS: Sand Volleyball Concrete-Free Pole Sleeve

• Designed for sand volleyball / sand soccer facilities.
• Allows for a 3-1/2" or 3" volleyball pole to slide into a removable sleeve held in place with a stainless steel pin.
• Entire sleeve removes from the base leaving nothing within 18" of the surface of the sand for a player to contact with their feet.
• No screwing or threads to worry about getting stuck with fine sand.
• Dip galvanized finish for prolonged buried use. (Stainless Steel available for an extra cost if requested)
• Installs easily by digging two trenches in the sand per sleeve.
• Support posts can be constructed out of wood or galvanized steel pipe (sold separately)
• Detailed installation instructions provided at no cost.

• Just what you need to install volleyball sockets in floors with lower level or crawlspace directly below volleyball court
• Pre-fabricated form can be used as is or field modified
• Use in conjunction with any of the above indoor sleeves
• Heavy welded steel with powder coated finish
• Detailed installation instructions provided at no cost.
• Weigh approximately 45 lbs each.

For situations where a larger pole needs to fit inside an existing smaller sleeve or socket.

• Constructed out of 1/4" Steel or Stainless Steel.
• The top half of the Reducer is sized to accept your existing volleyball pole while the lower half is machined to fit a smaller socket.
• Welded 360 degrees to prevent weld fatigue.
• Stainless steel set screw and bolt allow long term connection of adapters to your existing poles.
• For use for example when a 4" or 3-1/2" diameter pole needs to fit a 3" or 2-1/2" socket.
• Cost may vary depending on reduction needed and material requested.
• Adapters can be powder coated to match your existing pole color.

For situations where a larger pole needs to fit inside an existing smaller sleeve or socket.

• Constructed out of solid Aluminum, Steel or Stainless Steel.
• The top half of the Reducer is machined to match your poles inner diameter and the bottom half is machined to match your floor socket's inner diameter.
• Machined stop in middle prevents Reducer from inserting upwards inside the pole.
• Reducers can be slip fit for temporary use or permently glued or welded for long term use.
• For use for example when a 4" or 3-1/2" diameter pole needs to fit a 3" socket.
• Cost may vary depending on reduction needed and material requested.