Drill-In Floor Anchor The Jaypro FP-89 deluxe floor anchor features a billet steel body that gives 9,000 lb. pullout strength intended for all floor applications except floating wood floors. The center has a 1/2"-13 thread with a spring-loaded closure plug and the... $210.00 Adding to cart… The item has been added
VB 3.5" and 3" Floating Floor Socket with High Strength Brass Floor Plate Cover Plate: Premium quality, 8" Outside Diameter with 6" Inside Diameter opening with a 1/4" thickness made of solid cast brass. Hinged floor plate is machined for a high quality fit and finish. 1" Wide Hinge for long term strength and durability... $305.00 Choose Options Adding to cart… The item has been added
Lockable 3.5" and 3" Floating Floor Socket with High Strength Chrome Plated Steel or Brass Floor Plate Lockable plates prevent dead spots in gym floor during basketball games Chrome-plated cover plate includes slotted locking mechanism Opens with simple turn of the flathead screwdriver or coin Cover plate consists of 7" (18cm) O.D. chrome outer ring and... $300.00 Choose Options Adding to cart… The item has been added
5-Inch-SP: 3.5" and 3" Sockets with a 5" O.D. Swivel Plate 3" or 3-1/2" Sleeves are secured with a special swivel hinge to prevent removal or theft. Available in 5" Outside Diameter Chrome Plated Steel or Solid Brass The cover plate lies flat on the floor while the equipment is in use. A special cover removal... $299.00 $235.00 Choose Options Adding to cart… The item has been added
HS-NEW-C-3" & 3.5" Hard Surface Floor Socket (Concrete, Tile, Carpet, Etc..) Designed for new construction where you wish to pour concrete right up next to the edge of the sleeve. Our sleeve cap fits flush inside the sleeve for a completely flush installation. Powder coated seamless aluminum construction with welded base ring to... $196.00 $182.00 Choose Options Adding to cart… The item has been added
HS-EC-3.5" and HS-EC- 3" Hard Surface Floor Socket (Concrete, Tile, Carpet, Etc..) Powder coated seamless aluminum construction with welded base ring to lock sleeve firmly into concrete For use on all non-floating floor systems, including concrete, tile, carpet or synthetic materials Includes aluminum powder coated cap Requires... $158.00 $150.00 Choose Options Adding to cart… The item has been added
PIP 3.5" and 3" Sleeve Hard Surface Economy Floor Socket Seamless Anodized Aluminum Construction Use on all non-floating floor systems, including concrete, tile or synthetic Powder Coated Aluminum Cap Requires excavation of existing floors Socket is approx. 18" deep Requires two per system Note: Floors with... $141.50 $105.00 Choose Options Adding to cart… The item has been added
BD-POP-S: Bolt Down POP 3.5 and 3" Sleeve Outdoor Ground Socket (18" Length) (Sand, Grass, Concrete, etc...) Our Anodized Aluminum lined Bolt-Down POP Sleeve is designed to sit on-top of a submerged concrete footing which is typically 2 foot by 4 foot wide. (This footing may need to be bigger or smaller depending on how hard your existing soil is) 6 stainless...
BSBD: Boot Sleeve Bolt Down Designed for sand volleyball / sand soccer facilities. Allows for a 3-1/2" or 3" volleyball pole to slide into a removable galvanized or stainless steel sleeve held in place with a stainless steel pin. Entire sleeve removes from the base leaving nothing...
CFBS: Sand Volleyball Concrete-Free Pole Sleeve Set Designed for sand volleyball / sand soccer facilities. Allows for a 3-1/2" or 3" volleyball pole to slide into a removable sleeve held in place with a stainless steel pin. Entire sleeve removes from the base leaving nothing within 18" of the surface of... $899.00 $640.00 Choose Options Adding to cart… The item has been added
UV-AGSA: United Volleyball Above Ground Sleeve Adapter For situations where a larger pole needs to fit inside an existing smaller sleeve or socket. Constructed out of 1/4" Steel or Stainless Steel. The top half of the Reducer is sized to accept your existing volleyball pole while the lower half is machined...
UV-PR: United Volleyball Pole Reducer For situations where a larger pole needs to fit inside an existing smaller sleeve or socket. Constructed out of solid Aluminum, Steel or Stainless Steel. The top half of the Reducer is machined to match your poles inner diameter and the bottom half is...
Second Story Volleyball Socket Form Just what you need to install volleyball sockets in floors with lower level or crawlspace directly below volleyball court Pre-fabricated form can be used as is or field modified Use in conjunction with any of the above indoor sleeves Heavy welded steel... $434.00 Choose Options Adding to cart… The item has been added
Recessed Cap Style 1 Foot Stainless Steel Pool Sleeve Our high end pool sleeve, Flush Mounted Stainless Steel Pool Sleeve with Stainless Steel Covers. Cap rests flush with the sleeve. Completely stainless with added brass ground screw located on the bottom of sleeves for grounding. Features: New Style 1... $120.00 Adding to cart… The item has been added
VB25FL Flange Thin Slab Drill-In Floor Anchor Same as VB2.5 except with flange to add additional anchor support when installed on floating maple floor systems Includes all necessary hardware Requires small hole drilled in wood floor and in concrete below. Provides 1/2" threaded hole with spring... $214.00 Choose Options Adding to cart… The item has been added
Upside Down Top Hat Style Stainless Steel Pool Sleeves with Stainless Steel Caps QTY:(2) - 1 Foot Stainless Steel Pool Sleeves Comes with Stainless Steel Caps and in two sizes: 1.9" and 1.5" 2" Sleeve has 2.06" Inner Diameter 1.5" Sleeve has 1.59" Inner Diameter Sold as a set of two sleeves $115.00 Choose Options Adding to cart… The item has been added
VB25 Concrete Slab Drill-In Floor Anchor Heavy Duty Drill-in Floor Anchor to Volleyball systems to the floor. Includes all necessary hardware Requires small hold drilled in floor and concrete below Provides 1/2" threaded hole with spring loaded plug. Detailed installation instructions provided... $170.00 Choose Options Adding to cart… The item has been added
1 Foot PVC Pool Sleeves with Stainless Steel Caps QTY: (2) - 1 Foot PVC Pool Sleeves with Stainless Steel Caps Comes in two sizes: 1.9" and 1.5" 1.9" Sleeve has 2" Inner Diameter 1.5" Sleeve has 1.59" Inner Diameter Sold as a set of two sleeves $95.00 Choose Options Adding to cart… The item has been added
VB25TF Thin Slab Drill-In Floor Anchor Wide range of thin slab applications Use on athletic floors that have playing surface installed directly over a concrete surface such as tile or synthetic and where the concrete is too thin to allow the use of VB25 or VB25FL Same 1/2" threaded insert... $214.00 Choose Options Adding to cart… The item has been added