Pool Volleyball Systems

Swimming pool volleyball can be a lot of fun but players tend to be hard on the pool volleyball net and the poles.  It is not uncommon to see adults and kids hanging from the pool volleyball net playing the game or just having fun.  When we make strong volleyball nets the weight of the person playing with the net transfers to the poles.  We have found that making these 1.9" poles out of solid aluminum provides incredible strength with long lasting value in a swimming pool environment.

• High strength 1.9" Outside Diameter solid aluminum volleyball poles.
• Poles are either clear anodized or powder coated silver for prolonged outdoor protection.
• Shipped in 5' lengths with 1' sleeves (Other lengths are available at an additional cost.)
• (1) Rope Ratchet tensioner provided to tighten top of pool volleyball net.
• (1) Rope Ratchet tensioner provided to tighten bottom of pool volleyball net.
• Optional Pool Tension Kit comes with (2) Rope Ratchets and (2) Stainless Carabiners.
• 2 Carabiner clips are provided to quickly clip net onto one pole.
• System is designed so the pool volleyball net can be clipped onto one pole and instantly tightened on the other pole to allow rapid set-up and take down.
• You can select the net you would like to add to this system from our pool nets page or commonly purchased nets from the dropdown list.
• Also available with protective/decorative pole pads.
• Swimming pool water is very corrosive.  These poles are anodized to protect against UV and chemical erosion but we advise periodically clear coating the poles after years of use with additional clear coat paints to add to the product's longevity.
• MADE IN THE USA!
• Stainless Steel and PVC Sleeves and caps are available but are sold separatelySleeves and caps are available but are sold separately
• $95 for 1 Foot PVC sleeves with Stainless Steel caps (Sold as a pair)
• $115 for 1 Foot Stainless Steel sleeves with Stainless Steel caps (Sold as a pair)
• $120 1 Foot Stainless Steel sleeves with Stainless Steel Flush Mounted Caps (Sold Individually) ($240 For a Pair)

• Note: When installing pool volleyball sleeves, you may have to ground them per your local electrical codes.

Installation Instructions

Connecting Net to Pole Hardware Video

*Pads shown in our video have changed a little bit in design since filming this video. Please see photos for what we are shipping currently.

• Pool Volleyball Equipment that lasts years, not months!High strength, solid aluminum 1.5" outside diameter pool volleyball poles.
• Poles are either clear anodized or powder coated silver for prolonged outdoor use protection.
• Shipped in 5' lengths with 1' sleeves (Other lengths are available at an additional cost.)
• Rope Ratchets provided to tighten top and bottom of pool volleyball net.
• Caribiner snap clips provided for quick connection and storage of pool volleyball net.
• System is designed so the pool volleyball net can be clipped onto one pole and instantly tightened on the other pole to allow rapid set-up and take down.
• Select the net you would like to add to this system from our pool nets page.
• System can also be ordered with our free recreation net
• Swimming pool water is very corrosive.  These poles are anodized to protect against UV and chemical erosion but we advise periodically clear coating the poles after years of use with additional clear coat paints to add to the product's longevity.
• Only The Poles and Hardware is Included In This Pricing ($478) Everything Else Is Extra.
• MADE IN THE USA!Sleeves and caps are available but are sold separately

• $95 for 1 Foot PVC sleeves with Stainless Steel caps (Sold as a pair)
• $115 for 1 Foot Stainless Steel sleeves with Stainless Steel caps (Sold as a pair)
• $120 1 Foot Stainless Steel sleeves with Stainless Steel Flush Mounted Caps (Sold Individually) ($240 For a Pair)

• Note: When installing pool volleyball sleeves, you may have to ground them per your local electrical codes.

Installation Instructions

Connecting Net to Pole Hardware Video

The Bolt-Down Pool System is made for those wanting a sturdy pool system that does not require installing sleeves. Simply drill 2-4 small holes in concrete and install your anchors with this system. Stainless steel knobs hold the pole in place while in use and simply unscrews to remove poles after use.

DETAILS:

• Includes custom width IL2D volleyball net (2" wide 13 oz. border on the top and bottom and 4" border on the sides.  #27 netting and has an approximate 270 lb. break point.)
• Upgrade net for $63 - HD2 (Heavy Duty 2" wide 18oz border on top and bottom and 4" border on the sides. 18oz vinyl that is fade and wrinkle resistant with #36 netting and 360lb break point)
• Upgrade net for $60 - ML4 (Mid Level 4" borders made of 13 oz. vinyl. #27 netting with 270lb break point. net shown in photo) 
• System can be ordered with protective pads (Standard wrap around pads run $200 for a set and pads made with pre-formed corners run $400 for a set)
• System without the net is $384 (Call 425-576-8835 to order without a net)

ATTENTION: Due to Weight, shipping costs may be very high

• If you want a heavy duty volleyball pole you don't have to install into your pool deck, this is the system for you.
• 2 heavy duty 4" x 4" Aluminum posts
• Molded plastic bases weigh 500 lbs. each when filled with water.
• 32' net with 40' extension rope
• Hot Pink Volleyball
• Easy to set up; no tools required.
• Basketball Conversion Kit available

• Regulation Size Pool Volleyball Set
• Works for Commercial & Residential Pools
• Two Sturdy 1.90" Aluminum Posts
• Heavy-Duty 24' Net
• Molded Plastic Bases Weigh 110 lbs., when filled with Water
• Comes with Hot Colored Ball
• Easy Set-up and Removal
• Net Length can be Shortened for Custom Fit
• System is available with Stainless Steel Poles

• Residential Pool Volleyball System
• Includes two sturdy stands, a Heavy-duty 24' Net and a Hot Colored Ball
• Molded Plastic Bases Weigh 80 lbs, filled with water
• Net can be shortened for Custom Fit

• Regulation Size Pool Volleyball System
• 1 1/2" Diameter Powder Coated Aluminum Posts with Shortening Kit, Adjustable Height Net Clamps, and Hot Colored Ball
• Hardware is Brass and Stainless Steel
• Unit is designed to fit Existing 1-1/2" PVC Insert
• Can be adapted to Fit Female Threads or 1.90 Ladder Anchors (Anchors not Included)
• System comes with a 24ft net (with instructions for how to cut down if needded)

• 2 in 1 Volleyball / Basketball System Converts Easily with no Tools
• Comes with two Heavy-duty polyethylene water filled stands, and one Backboard
• All Stainless Steel Hardware
• Volleyball Set includes 16' Net and Hot Pink Volleyball
• Basketball Set includes Steel Rim, Color Matched Basketball, and a 22" x 31" solid poly Backboard that hangs over water