3-1/2" Patriot Pin-Stop Hybrid Carbon Fiber / Aluminum Volleyball System

Getting the benefit of a Carbon Fiber base section with the strong, yet still lightweight Aluminum upper section provides a system with strong, stiff economical volleyball poles. Carbon Fiber System with American Made Carbon Fiber Poles, Net, Pads and Pin-Stop Height Net Adjustment. 

Poles weigh 32 lbs with a winch and 27 lbs without. 

Lighter than Aluminum, stiffness similar to steel!

The only Carbon Fiber Pin-Stop Volleyball System on the market sold with American Made Carbon Fiber Poles, Net, Pads and Pin Stop Net Adjustment. Carbon Fiber is now the material of choice of many top collegiate programs across the country and is designed for years of dependable use and quick and easy setup. MADE IN THE USA.

• Maximum rigidity, maximum convenience, maximum overall performance and maximum satisfaction.
• Carbon fiber 3-1/2" outer posts are built with maximum cross axis fibers started at the base of the pole to create a stronger carbon tube that may be flexed in multiple directions in times of competitive play.  (We do not pultrude our carbon tubes as some of our competitors do with the goal of reducing price as this results in a weaker, more brittle pole as their isn't very much 360 degree strength in that design. (Pultrude is pulling carbon and resin through a die in a linear direction)) 3" tempered aluminum inner extension tube keeps the pole stiff and reduces the cost of the posts.
• Worm Gear Winch: Stainless Steel. Engineered with stainless and bronze gears to prevent rusting. Collapsible handle for storage and safety.
• American made, Heavy Duty Knotted #36 volleyball net with Kevlar cords top and bottom sewn with Kevlar thread maximize net tension performance
• Designed to flex less than most steel systems and weighs less than most aluminum systems.
• Safety padding is available in 12 school colors and includes lettering of school name, mascot name or other wording
• (up to 10 letters) on each of the four sides
• System fits 3" diameter floor sockets but adapters to allow installation into existing 3-1/2" or 4" floor sockets are available free of charge on request
• Other standard features include premium Centerline antennae, net cable covers and 78" to 98" net height adjustment for all levels of play
• Entire system meets all NCAA, National High School Federation and USVBA rules
• Order clamp on or free standing padded official's stands separately
• Free socket adapters on request
• Lifetime limited warranty on posts and winch.
• Post weight for non-winch end 27lbs; winch end 32lbs. Approx. shipping weight: 150lbs; Truck

* If system is to go into existing sockets or non-floating floors, please advise so proper order adjustment is made.

Installation Instructions

Sleeve Option:

• POP Anodized Aluminum Pole Sleeve - Set of 2 ground sleeves made for each pole, suggested for use outdoors for sand, grass or concrete.

Net Options: 

• PBN4 - 4" Net Tapes made of 22 oz vinyl, ash dowels on both ends of the net. 
• ML4 - 4" Net tapes made of 13 oz vinyl with dowels built into the side of the net.

Boundary Line Options:

• 2" Pro Adjustable Boundary Lines - Our most popular webbing material boundary lines allow you to adjust between traditional and short court playing sizes. Has stainless steel corner rings for prolonged outdoor use and injury prevention. (30' x 60' court size lowers down to 26' x 52' court sizes).
• 2" Fixed Short Court Boundary Lines - Designed for 2 vs 2 doubles volleyball court size. Webbing constructed lines that are also great for those playing in smaller backyards. (8m x 16m / 26'3" x 52'6").
• 2" Premium Adjustable Boundary Lines - Adjustable boundary lines constructed of vinyl material (same as net tapes), increasing durability and longevity. (30' x 60' court size lowers down to 26' x 52' court sizes).

Antenna Options: 

• 1-Piece Antenna Set - 6' fiberglass antenna with velcro attaching sleeves (attaches to 35" (H) and 39" (H) nets)
• 2-Piece Antenna Set - Each antenna is divided into two 3' pieces which connect to form an antenna. Easier to store than the 1-Piece Antenna.(attaches to 35" (H) and 39" (H) nets.

Padding Options:

• VBSP - 2" Standard Pad - Wrap around style padding constructed of 2" of polyfoam and 18 oz vinyl.
• 2" Professional Pole Pad - Padding with pre-formed corners that forms a square uniformed shape around volleyball poles.
• Custom Printing - Submit your logos/artwork requests to be printed onto the padding.