Aluminum Indoor Volleyball Systems

The 3.5" OD (Outside Diameter) Patriot Aluminum System features strong, structural grade aluminum, providing similar stiffness to carbon fiber and steel volleyball poles. The poles are lighter than our Steel Patriot System poles, weighing approximately 40lbs. Height settings are easily adjustable for Men, Women, and Junior height settings using pin-stop or palm bolts. A complete system can be created using the drop down list on this page including poles, pole padding, volleyball net, floor sockets, antennas, and cable covers.  All products 100% Made in the USA. See table below for details.

* If system is to go into existing sockets or non-floating floors, please advise so proper order adjustment is made.

Instructions Download Link

3.5" Patriot System Spec Sheet

Floor Sleeves with Brass Floor Plate Spec Sheet

Concrete Floor Sleeves Spec Sheet

Sleeve Option:

• Wood Floor Sleeves with Brass Floor Plate - Set of 2 premium quality ground sleeves made for wood floors.
• Hard Surface Sleeves with Flush Style Aluminum Cap (concrete, tile, sport court) - Set of 2 designed for new construction where you wish to pour concrete right up next to the edge of the sleeve. Our sleeve cap fits flush inside the sleeve for a completely flush installation.

Net Options: 

• SenComp Indoor Pro Net - The net of choice for collegiate, high school, and club usage. Meets all standards and regulations for NCAA, NHSF, USVBA.

Antenna Options: 

• 1-Piece Antenna Set - 6' fiberglass antenna with velcro attaching sleeves (attaches to 35" (H) and 39" (H) nets)
• 2-Piece Antenna Set - Each antenna is divided into two 3' pieces which connect to form an antenna. Easier to store than the 1-Piece Antenna.(attaches to 35" (H) and 39" (H) nets.

Padding Options:

• VBSP - 2" Standard Pad - Wrap around style padding constructed of 2" of polyfoam and 18 oz vinyl.
• 2" Professional Pole Pad - Padding with pre-formed corners that forms a square uniformed shape around volleyball poles.
• Custom Printing - Submit your logos/artwork requests to be printed onto the padding.

 NEW in 2023 3.5'' patriot poles are powder coated black (base section only)

Our 3" Patriot Professional Aluminum Volleyball System is designed with more aluminum than any other system, creating the stiffest aluminum pole on the market. Included with a worm gear winch and collapsible handle, these poles are easily adjusted to any height (Men, Women, Junior) using a pin-stop or palm bolt. The poles are constructed with heavy wall aluminum and can be ordered in your school colors (extra charge) if preferred. All products included are 100% Made in the USA. See table for details.

* If system is to go into existing sockets or non-floating floors, please advise so proper order adjustment is made.

Instructions Download Link

3" Patriot Aluminum System Spec Sheet

Floor Sleeves with Brass Floor Plate Spec Sheet

Concrete Floor Sleeves Spec Sheet

Sleeve Option:

• Wood Floor Sleeves with Brass Floor Plate - Set of 2 premium quality ground sleeves made for wood floors.
• Hard Surface Sleeves with Flush Style Aluminum Cap (concrete, tile, sport court) - Set of 2 designed for new construction where you wish to pour concrete right up next to the edge of the sleeve. Our sleeve cap fits flush inside the sleeve for a completely flush installation.

Net Options: 

• SenComp Indoor Pro Net - The net of choice for collegiate, high school, and club usage. Meets all standards and regulations for NCAA, NHSF, USVBA.

Antenna Options: 

• 1-Piece Antenna Set - 6' fiberglass antenna with velcro attaching sleeves (attaches to 35" (H) and 39" (H) nets)
• 2-Piece Antenna Set - Each antenna is divided into two 3' pieces which connect to form an antenna. Easier to store than the 1-Piece Antenna.(attaches to 35" (H) and 39" (H) nets.

Padding Options:

• VBSP - 2" Standard Pad - Wrap around style padding constructed of 2" of polyfoam and 18 oz vinyl.
• 2" Professional Pole Pad - Padding with pre-formed corners that forms a square uniformed shape around volleyball poles.
• Custom Printing - Submit your logos/artwork requests to be printed onto the padding.

Monson Slider System is designed for coaches, players, and facility managers who wish to adjust their net height from junior, men, to women heights while leaving the net under full tension. The net can also be adjusted from the ground for tennis / pickleball and badminton. Net adjustment is achieved by the stainless steel ball bearings that provide smooth adjustment from one net height to another.

• 10 Year limited warranty on poles and winch with collapsible handle.
• Stainless steel pulley
• High strength tensioning strap for maximum bottom cable tension.
• Also available in 3.5" Steel (Call 1-800-494-3933 for pricing).
• Can be ordered with pole reducers to fit into existing 3" Sockets (Extra cost) or 4" sleeve adapters to fit larger sockets.
• Two different type of sleeves available. Wood Floor with brass access plates or Hard Surface Concrete/Tile/Carpet.
• Poles ship in powder coated white. (Powder coated poles in your school/club/team color can be added for an extra cost.  Call 1-800-494-3933 for pricing)

Instructions Download Link

Monson Slider System Spec Sheet

Sleeve Option:

• Wood Floor Sleeves with Brass Floor Plate - Set of 2 premium quality ground sleeves made for wood floors.
• Hard Surface Sleeves with Flush Style Aluminum Cap (concrete, tile, sport court) - Set of 2 designed for new construction where you wish to pour concrete right up next to the edge of the sleeve. Our sleeve cap fits flush inside the sleeve for a completely flush installation.

Net Options: 

• SenComp Indoor Pro Net - The net of choice for collegiate, high school, and club usage. Meets all standards and regulations for NCAA, NHSF, USVBA.

Antenna Options: 

• 1-Piece Antenna Set - 6' fiberglass antenna with velcro attaching sleeves (attaches to 35" (H) and 39" (H) nets)
• 2-Piece Antenna Set - Each antenna is divided into two 3' pieces which connect to form an antenna. Easier to store than the 1-Piece Antenna.(attaches to 35" (H) and 39" (H) nets.

Padding Options:

• VBSP - 2" Standard Pad - Wrap around style padding constructed of 2" of polyfoam and 18 oz vinyl.
• 2" Professional Pole Pad - Padding with pre-formed corners that forms a square uniformed shape around volleyball poles.
• Custom Printing - Submit your logos/artwork requests to be printed onto the padding.

The Portable Indoor Pole (PIP) System features the PIP Bazooka Slider which allows for easy sliding single point adjustment for different age brackets and other net sports (badminton / tennis). By simply loosening the Palm Bolt and using an allen key, you can quickly readjust the playing height in seconds. A Wormgear Winch and Pulley attachment are also included as part of the system, allowing for quick net setup. All products are made in the USA and backed by limited warranties.

• Stainless Steel Pulley
• 10 Year limited warranty on poles and winch with collapsible handle. 
• High strength tension strap for maximum bottom cable tension.
• Also available in 3.5" Steel poles
• Can be ordered with pole reducers to fit into existing 3" Sockets (Extra cost) or 4" sleeve adapters to fit larger sockets.
• Sleeves sold separately. Please notify if placing poles in a floating wood floor.

Sleeve Option:

• Wood Floor Sleeves with Brass Floor Plate - Set of 2 premium quality ground sleeves made for wood floors.
• Hard Surface Sleeves with Flush Style Aluminum Cap (concrete, tile, sport court) - Set of 2 designed for new construction where you wish to pour concrete right up next to the edge of the sleeve. Our sleeve cap fits flush inside the sleeve for a completely flush installation.

Net Options: 

• SenComp Indoor Pro Net - The net of choice for collegiate, high school, and club usage. Meets all standards and regulations for NCAA, NHSF, USVBA.

Antenna Options: 

• 1-Piece Antenna Set - 6' fiberglass antenna with velcro attaching sleeves (attaches to 35" (H) and 39" (H) nets)
• 2-Piece Antenna Set - Each antenna is divided into two 3' pieces which connect to form an antenna. Easier to store than the 1-Piece Antenna.(attaches to 35" (H) and 39" (H) nets.

Padding Options:

• VBSP - 2" Standard Pad - Wrap around style padding constructed of 2" of polyfoam and 18 oz vinyl.
• 2" Professional Pole Pad - Padding with pre-formed corners that forms a square uniformed shape around volleyball poles.
• Custom Printing - Submit your logos/artwork requests to be printed onto the padding.

Power volleyball at the highest level demands equipment to match...Pro Series Aluminum is in use in top collegiate programs across the country and is designed for years of dependable use and quick and easy setup.

• Our unique Auto-Trac spring-assisted telescoping piston design makes infinite height adjustment smooth and effortless.
• No pins to mess with.
• Adjusts to all levels of play.
• Easy-to-read height adjustment scale.
• Special extrusion shape and tempering allows bowstring-tight net tensioning even with 50 pounds less pole weight than other popular telescoping steel systems.
• Shur-Lock worm gear winch is engineered specifically for our Pro Series systems and features a 13:1 worm gear ratio for smooth and easy net tensioning.
• Backlash is impossible with the 2" tightening web strap.
• Handle folds away to allow proper post padding fit without lost handles common with other systems.
• Standards and winch are covered by a limited lifetime warranty.
• 3" outer post has a red anodized finish.
• Comes with 3" floor sockets and brass hinged floor plates but will fit any existing 3" or 3-1/2" sockets with the 3-1/2" socket adapters included with every system.
• If system is being installed in concrete, tile, or synthetic floor, substitute VB235 floor sockets.
• Call if existing 3-1/2" floor sockets are more than 12" deep. (Custom-built sockets available at no extra cost.
• Eight padding colors in stock and four colors by special order.
• Order VB72 official's stand and VB77P official's stand padding sold separately.

VB-1100 Aluminum System Includes:

* If system is to go into existing sockets or non-floating floors, please advise so proper order adjustment is made.

All the popular features of our multi-sport steel volleyball systems now available in lightweight, yet sturdy aluminum

• Each post is 33% lighter than our multi-sport steel system
• Standards are specially designed, heavy wall aluminum extrusions
• Package complete with Power Tension net, all necessary padding, boundary antennas and floor sockets
• Superior net tensioning for the ball bounce preferred by players and coaches
• Close to the post, backlash-free rack and pinion top cable tensioner
• Easy-to-read height indicators on both posts
• Adjusts net height for 42" to 96" for all levels of competition play
• Will retrofit into all existing floor sockets that are designed for 3 1/2" outside diameter poles
• Meets all NCAA, USVBA and National Federation of State High School Associations' rules
• Attractive white powder coated finish
• Post padding protects to 5 1/2' height
• Eight padding colors in stock and four colors special order at no extra cost
• Order VB70 official's stand and VB75P-XX officials's stand padding separately
• Approximate shipping weight is 175 lbs. via truck

VB-6100 Aluminum System Includes:

Basic, easy to lift volleyball standards. If ease of setup, infinite net game adjustment and no-frill price are your preferences, this package is what you are looking for!

• Standards are the same as those on VB6000-XX
• Floor sockets are for synthetic, tile or concrete floors
• Sockets for floating maple floors are available at additional cost
• Great choice for recreational facilities where standards are commonly setup by young players
• Other components sold separately
• Approximate shipping weight is 145 lbs. via truck

VB-6150 Aluminum System (With Pads) Includes:

* If system is to go into existing sockets or non-floating floors, please advise so proper order adjustment is made.

Utilizing our American Made Ultra-Stiff 3-1/2" OD Aluminum Patriot Poles in an above ground, screw down set-up. This system doesn't require traditional sleeves. This system requires you to drill one small hole in the floor on each side of the court and insert the floor anchors which stay permanently in the floor. When playing the rolling T-Bases have two palm bolts that simply screw down into the floor anchors and secure the poles in an upright position.

Above ground systems require more equipment to purchase making them slightly more expensive than in-ground systems. However, installation costs are typically a fraction of the cost compared to in-ground socket installation so they tend to be a less expensive option when the costs for the entire project are added together.

• Lightweight aluminum poles allows for easy roll-out and set-up.
• Standards are specially designed, heavy wall aluminum extrusions
• Package includes an American Made Sencomp Volleyball game net sewn with Kevlar Thread with Velcro Straps, Pro-Style padding, 2-Piece Velcro antennas, T-Base Above Ground Floor Bases, and 4 Drill In Floor Anchors
• Superior net tensioning for the ball bounce preferred by players and coaches
• Worm Gear winch with limited lifetime warranty
• Net height adjusts from juniors to women's to men's.
• Meets all NCAA, USVBA and National Federation of State High School Associations' rules
• Attractive powder coated finish
• Multiple padding colors to choose from.
• If a ref stand is needed, we suggest a free standing style which works better above the T-Base Supports below.
• T-Base Base Pads are sold separately as many of our customers choose to use the system with just the protective post pad. ($340 each. 2 needed for one court)
• Approximate shipping weight is 235 lbs. via truck

Floating Wood Floor Anchor Spec Sheet

T-Base Spec Sheet

Patriot Pole Detail Sheet

T-Base Single Anchor Aluminum Volleyball System Includes: 

A quality 3" telescoping aluminum system made internationally for those maximizing their budget.

• 3" O.D. high-strength aluminum poles with gray powder coated finish.
• The telescoping inner pole allows for infinite settings.
• The pole is pre-marked for the 2 official settings for men and women
• The worm gear ratchet includes a nylon tension strap that makes net tension easy and eliminates snap back.
• Tournament quality volleyball net included.
• Fiberglass antennas included.

International 3" Aluminum System Includes:

* If system is to go into existing sockets or non-floating floors, please advise so proper order adjustment is made.

A quality aluminum system made internationally for those maximizing their budget.

• 3-1/2" O.D. high-strength aluminum poles with gray powder coated finish. (Square telescoping upper pole section with round lower section)
• The telescoping inner pole allows for 10 preset, positive , locking net height adjustments.
• The worm gear ratchet includes a nylon tension strap that makes net tension easy and eliminates snap back.
• Tournament quality volleyball net included.
• 2 Ground Sleeves with Floor Plates
• Fiberglass antennas included.
• 2 Thick protective pole pads included (Royal Blue, Black, Dark Green, Navy Blue, and Scarlet Red)

IAS International System Includes:

* If system is to go into existing sockets or non-floating floors, please advise so proper order adjustment is made.

Set includes all moveable heavy duty hardware, which can be adjusted with allen key or palm bolt for any net height and other games: badminton, tennis, etc..

• Poles are 3" O.D. thick wall aluminum and weigh 35 lbs each. 
• Poles are also available in heavy wall steel at 59 lbs and are available in 3-1/2" O.D. dimensions in both steel and aluminum (Extra cost, Call 1-800-494-3933 for pricing).
• Net connection hardware moves together up and down the pole allowing easy net height adjustment without a chair or ladder.
• Stainless Steel Nuts and Set Screws
• System includes two high strength tensioning straps for maximum top and bottom net tension.
• Top internal drive caps for poles.
• Poles are plugged on bottom to prevent floor scratches.
• System may be ordered with a worm gear winch at an extra cost
• System includes 2 hard surface economy sleeves (Sleeves include flush-mount plastic caps, powder coated steel caps are available at an extra cost)
• RP Practice Net included. (Other nets can be ordered for this system at an extra cost)

Posts are placed in sleeves designed for concrete floors. Please notify us if placing poles in wood floor.

RP-32 Rope Top Practice Net: 

• #27 treated black netting.
• White 10 oz. vinyl around all 4 sides of net
• #8 white mfp cord top with #8 white mfp cord bottom
• Length: 32'
• Width: 36"