Outdoor Sleeves

• Designed for new construction where you wish to pour concrete right up next to the edge of the sleeve. Our sleeve cap fits flush inside the sleeve for a completely flush installation.
• Powder coated seamless aluminum construction with welded base ring to lock sleeve firmly into concrete
• For use on all non-floating floor systems, including concrete, tile, carpet or synthetic materials
• Includes aluminum powder coated cap
• Requires excavation of existing floors
• Socket is approx. 12" deep
• Requires two per system
• Sleeves are stocked in two sizes to accomodate 3-1/2" poles or 3" poles. (Also available for other sizes, call 1-800-494-3933 for pricing and availability)
• Note: Floors with basements or hollow cavities below require additional re-inforcement. Please call us for site specific install help.
• Detailed installation instructions provided at no cost.
• Sold Indivudually

Installation Instructions

• Powder coated seamless aluminum construction with welded base ring to lock sleeve firmly into concrete
• For use on all non-floating floor systems, including concrete, tile, carpet or synthetic materials
• Includes aluminum powder coated cap
• Requires excavation of existing floors
• Socket is approx. 12" deep
• Requires two per system
• 6" O.D. Sleeve cap ring completely covers hole drilled through concrete so no floor repair is needed after installing sleeves.
• Key slot on cap allows for easy removal
• Note: Floors with basements or hollow cavities below require additional re-inforcement. Please call us for site specific install help.
• Detailed installation instructions provided at no cost.
• Sold Indivudually

Installation Instructions

• Seamless Anodized Aluminum Construction
• Suggested for use outdoors in sand, grass, or concrete
• Powder Coated Aluminum Cap
• Socket is approx. 36" deep
• Requires two per system
• Note: Floors with basements or hollow cavities below require additional re-inforcement. Please call us for site specific install help.
• Detailed installation instructions provided at no cost.
• Sold Indivudually

Installation Instructions

• Developed for below grade sleeve installs where preventing sand from entering the sleeve is desired.
• Suggested for use outdoors in areas where sand, dirt, debris can enter the sleeve
• 12" height allows for easy alignment of Sleeve Cover when sliding pole into sleeve.
• 2" x 12" Velcro attachment provides an extremely tight fit preventing sand from entering sleeve.
• Requires two per system
• Highly recommended in courts with angular sand particles
• Directions included

• Our Anodized Aluminum lined Bolt-Down POP Sleeve is designed to sit on-top of a submerged concrete footing which is typically 2 foot by 4 foot wide. (This footing may need to be bigger or smaller depending on how hard your existing soil is)
• 6 stainless steel j-bolts are installed to accept a steel bolt down plate.
• The anodized aluminum liner prevents the volleyball pole from rust-seizing inside the sleeve.
• The bolt down installation allows for manipulation of the angle of the volleyball pole to compensate after installation for pole deflection / soil compaction.
• Sleeves are designed to accept 3", 3-1/2" and 4" pole sizes. (Other sizes are available, please call 1-800-494-3933 for availability and pricing)

• Designed for sand volleyball / sand soccer facilities.
• Allows for a 3-1/2" or 3" volleyball pole to slide into a removable galvanized or stainless steel sleeve held in place with a stainless steel pin.
• Entire sleeve removes from the base leaving nothing within 18" of the surface of the sand for a player to contact with their feet.
• No screwing or threads to worry about getting stuck with fine sand.
• Dip galvanized finish for prolonged buried use. (Stainless Steel available for an extra cost if requested)
• Plate attaches to concrete footing via 4 J-Bolts submerged in concrete.
• Detailed installation instructions provided at no cost.

Installation Instructions

• Designed for sand volleyball / sand soccer facilities.
• Allows for a 3-1/2" or 3" volleyball pole to slide into a removable sleeve held in place with a stainless steel pin.
• Entire sleeve removes from the base leaving nothing within 18" of the surface of the sand for a player to contact with their feet.
• No screwing or threads to worry about getting stuck with fine sand.
• Dip galvanized finish for prolonged buried use. (Stainless Steel available for an extra cost if requested)
• Installs easily by digging two trenches in the sand per sleeve.
• Support posts can be constructed out of wood or galvanized steel pipe (sold separately or purchased locally)
• Detailed installation instructions provided at no cost.
• SOLD AS A SET

Our high end pool sleeve, Flush Mounted Stainless Steel Pool Sleeve with Stainless Steel Covers. Cap rests flush with the sleeve. Completely stainless with added brass ground screw located on the bottom of sleeves for grounding.

Features:

• New Style 1 Foot Stainless Steel Pool Sleeves - 2.5" Outer Diameter, 2.03" Inner Diameter
• Flush Mounted Sleeve 
• Stainless steel caps with machined hole for easy removal of caps
• Brass ground screw located on bottom of sleeves for grounding
• Welded stainless steel base
• NOTE: This style of sleeve is sold individually. Please double check your quantity

Installation Instructions

• QTY:(2) - 1 Foot Stainless Steel Pool Sleeves 
• Comes with Stainless Steel Caps and in two sizes: 1.9" and 1.5" 
• 2" Sleeve has 2.06" Inner Diameter 
• 1.5" Sleeve has 1.59" Inner Diameter 
• Sold as a set of two sleeves

• QTY: (2) - 1 Foot PVC Pool Sleeves with Stainless Steel Caps 
• Comes in two sizes: 1.9" and 1.5" 
• 1.9" Sleeve has 2" Inner Diameter 
• 1.5" Sleeve has 1.59" Inner Diameter 
• Sold as a set of two sleeves

• 3" I.D. PVC Sleeve Set with plastic caps top and bottom.

• 36" PVC Sleeve Set with Caps
• 4-1/8" ID by 4-1/2" OD

• UV-TOP-Sleeve-Set
• (2) 3' 4-1/8" ID PVC Sleeves with 4-1/2" OD
• (2) 2' 3-1/2" OD PVC Inserts with plugs top and bottom
• Sleeves extenders easily slide and attach